NERSCPowering Scientific Discovery Since 1974

Hopper Featured Announcements

Debug nodes now reserved from 5am - 6pm Pacific Time

November 30, 2010 by Katie Antypas

To enable better turn-around time for short debugging jobs, 512 compute nodes (12,288 cores) have been reserved from 5am-6pm Pacific Time 7 days a week.  These nodes are dedicated to the debug and interactive queues which have a wall clock limit of 30 minutes.

Read the full post

Hopper II now open from outside of NERSC network

November 30, 2010 by Katie Antypas

Users no longer need to access the Hopper II system through another NERSC system like Franklin or Carver.  Direct access from outside the NERSC network is available with the command:

Read the full post

Hopper II available for early users

November 17, 2010 by Katie Antypas

Early user accounts are enabled on the Hopper Phase II system which is NERSC's first peta-flop machine.  It has 6392 nodes (over 150,000 processor cores) and uses the new gemini interconnect.  We invite you to run on the Hopper II system free of charge in exchange for providing feedback to NERSC staff about your experiences using Hopper II.   Please report any problems to the consultants at consult@nersc.gov.  Cray staff are continuing to make improvements to the system and we are sharing the early user time with them.  We will keep the MOTD up to date to show when the system is available to run users jobs: http://www.nersc.gov/nusers/status/motd.php


If you have not logged into Hopper2 before, you can get to the system through another NERSC system like Franklin or Carver with the command:

ssh hopp2.nersc.gov

Early Hopper phase II system documentation is located here.

You will have to enter your NIM username and password to see the new documentation.  Note that this site should only be used to view Hopper2 documentation.  The main NERSC website www.nersc.gov should still be used for all other systems and services.


Please remember this is an early system which has not yet been accepted by NERSC.  The software environment is not complete and Cray is still making improvements on the system.  Support may be limited.  Additionally, as an early user on the system you agree to do the following:

** Report all bugs, problems, and usability issues you have with the system to consult@nersc.gov.

** Report the performance of your code and your experience using Hopper to consult@nersc.gov.

** Not publish any machine performance results without the consent of NERSC. It is OK to publish science results, but since the machine has not yet been accepted we can not release information about specific code performance or I/O performance as Cray is still making configuration improvements.

** Understand that your job may be aborted at any time if Cray or NERSC staff need to do testing or maintenance on the system.

** Back up your data often. The file systems will not be backed up and the file systems could be reformatted with little or no warning.


Thanks,

Katie Antypas
NERSC User Services

Read the full post

Early User Timeline

November 15, 2010 | 0 Comments

Earliest users enabled on system - November 15, 2010

0 comments | Read the full post